1 5

45x80x11.5/13 Shaft Seal HK1577356 Oil Seal Fit Gorenje Hisense Washer 45 80 11.5 13 Tub Seal

45x80x11.5/13 Shaft Seal HK1577356 Oil Seal Fit Gorenje Hisense Washer 45 80 11.5 13 Tub Seal

$10.73 USD
$10.73 USD $10.73 USD
Sale Sold out
Taxes included. Free standard shipping to supported addresses in Australia and the United States. Delivery details.
Product OverviewThis 45×80×11.5/13 washer shaft seal sits between the drum shaft and the rear tub. It keeps water out of the bearing and stops oil from leaking into the drum.
color

Delivery to Australia & the US

Returns & refunds

A worn seal can cause water leaks at the rear tub, rusty bearings, or grinding noise during spin.

Key Features

  • Size: 45 × 80 × 11.5/13 mm

  • Inner diameter: 45 mm

  • Outer diameter: 80 mm

  • Height: 11.5 / 13 mm

  • Universal / Alternative Numbers: HK1577356

  • Type: Washer drum shaft / tub oil seal

  • Material: NBR rubber with spring-loaded lip

  • Quantity: 1 piece

Installation Instructions

  1. Unplug the washer and disconnect power.

  2. Remove the rear tub or bearing housing to access the old seal.

  3. Confirm the old seal measures 45 mm inner / 80 mm outer / 11.5–13 mm height, or is marked HK1577356.

  4. Take off the old seal. Clean the housing and shaft.

  5. Lightly grease the new seal lip, then press it in square. Do not hammer the lip.

  6. Reassemble, restore power, and run a short test cycle. Check for leaks.

Compatibility / Fit Models
This 45×80×11.5/13 seal fits selected Gorenje and Hisense washers that list HK1577356.

Gorenje
W1D2A854ADPS W1D2A164ADS W1NHEI74SAS W1NHA74SAS W3NHEI74SAS
W1NHPI84AS W2NHPI74SCPS W2NHPI94BS W814QPM W814QYS W914BL W914BLT
W1014BLV W1014FQRT W1214QA W1214QAT W1214QE W714QY W9014QPM

Hisense
WD3S8042BW1 WD3S8042BW WD3S8043BW3 WD3S9043BW3 WD3S1043BW3
WD5S1045BW WD5S1245BB WD2A164ADS WD2A854ADS WD2A964ADS
HW3S1X14 HWD3S8514 WD10514 WD10514S

Also listed as
HK1577356 45x80x11.5/13 45*80*11.5/13

Note: Always measure the old seal: inner 45 mm, outer 80 mm, height 11.5/13 mm, or match part number HK1577356. One washer requires 1 seal. Compatibility may vary by production year.

Applications

  • Water leak at the rear tub

  • Bearing rust or grinding noise

  • Oil or grease in the drum

  • Shaft seal replacement during bearing repair

  • Ideal for home DIY and technicians

Package Includes

  • 1 × Washer Shaft Oil Seal (45×80×11.5/13 / HK1577356 Compatible)

SEO Keywords Description (EN)
45x80x11.5/13 oil seal, HK1577356 shaft seal, Gorenje washer seal, Hisense tub seal, 45 80 13 drum seal

View full details